KUPO OPTICSDesigner Sample Program ↗
Products / Black Coating / AL-TI-01
AL-TI-01 measured optical spectrumOpen full-size image ↗
Explore the optical responseView interactive spectrum ↗

Black Coating

AL-TI-01Black Coating

AL-TI-01 is a Black Coating design for optical masking and reflection management. Compare its CS and GS reflectance profiles across the measured 380–800 nm range.

  • Product family: Black Coating
  • Application: Optical masking & reflection control
  • Measured wavelength range: 380–800 nm
  • Measured response: Reflectance (R%) · CS / GS

MEASURED OPTICAL RESPONSE

Read the light.

Original published sample data.

Download spectrum CSV ↓
Loading measured spectrum…

Nearest measured point shown; no interpolation or extrapolation. Original sample values are preserved, including values outside 0–100%. Samples are selection references, not production acceptance limits.

OPTICAL PERFORMANCE · AL-TI-01

Read the numbers.
Understand the response.

CS average reflectance, 420–680 nm

90.734% average R. Mean measured reflectance for the CS curve over this wavelength interval.

GS average reflectance, 420–680 nm

5.127% average R. Mean measured reflectance for the GS curve over this wavelength interval.

OPERATING CONDITIONS

Match the complete optical system.

Match the full source band.

Compare the source emission spectrum with the filter curve. Include the source bandwidth, rather than relying on the nominal wavelength alone.

Check unwanted response.

Compare the complete measured response with your detector sensitivity. Confirm any additional blocking needed for your system.

Define the incidence conditions.

Specify the working angle and whether the beam is collimated or converging. Confirm the required response under those conditions.

Confirm the physical fit.

Provide the available mounting space, required shape, dimensions and thickness. Physical specifications will be confirmed for your assembly.

APPLICATIONS

Where this profile can help.

Optical masking

Evaluate the coating for masked regions in optical components, with reflection control selected for the intended illumination and viewing geometry.

Instrument components

Compare the CS and GS reflectance profiles when selecting a coated glass component for an optical assembly.

CUSTOM & ENQUIRY

Tell us what
your design needs.

Start with AL-TI-01 and discuss the spectral response, physical format and operating conditions.

Include in your enquiry

  • Target wavelengths and required transmission or blocking
  • Light source and detector model, or their spectra
  • Working angle, beam geometry and operating environment
  • Required shape, dimensions, thickness and mounting constraints
  • Sample quantity, expected order quantity and project timing

TECHNICAL RESOURCES

Take the data
into your design.

AL-TI-01 spectrum data CSV ↓Explore Black Coating →